Drivio
Remote-Control License Plate Cover – Universal 12×6 Fit
Options · 1Pcs
Selected set · Single-frame kit
One frame setup.
Details
A remote-controlled pull-down license plate cover system built around the standard 12 × 6 inch North American plate size. The frame uses painted iron construction and can be operated by the included remote or controller.
Fitment
- Universal-style fit for vehicles with a suitable flat mounting surface
- Designed around standard 12 × 6 in (30.5 × 15.25 cm) plates
- Rear mounting application
- Available in 1-piece and 2-piece configurations
Key features
- Remote operation: Up to approximately 30 m / 98.4 ft
- Pull-down design: Motorized cover movement controlled from the cabin or remote
- Painted iron construction: Built for outdoor exposure
- 12V vehicle power: Includes wiring needed for installation
- Pre-drilled mounting points: Designed for a secure installation
Dimensions & specifications
- Inner plate area: 30.5 × 15.25 cm / 12 × 6 in
- Outer frame size: 31.5 × 25 cm / 12.4 × 9.84 in
- Power cable: 1.2 m / 3.9 ft
- Indicator cable: 1.2 m / 3.9 ft
- Controller-to-frame cable: 5 m / 16.4 ft
- Color: Black
- Material: Iron
What's included
The 2-piece kit includes 2 license plate frames, 1 controller, 1 remote control, 1 power cord, 1 indicator cable, 2 controller-to-frame cables and 4 mounting screws. Contents scale with the selected configuration where applicable.
Installation notes
- Installation requires routing and securing wiring; professional installation is recommended if you are not comfortable with automotive electrical work.
- Green controller light indicates normal mode; red indicates cover mode.
- Remove the two bottom screws when opening the plate assembly; do not remove the side screws.
Use responsibly and in accordance with local law. Plate visibility requirements vary by jurisdiction, and covering a plate on public roads may be prohibited.
Choose your kit
1-piece
One frame setup.
2-piece
Two-frame setup. The 2-piece kit includes the controller, remote and wiring specified in Details; contents scale with the selected configuration where applicable.
Fitment + installation
Plate size
Standard 12 × 6 inch North American format.
Mounting
A suitable flat mounting surface is required.
Power
12V power and wiring are required.
Intended for off-road, show, track, photo or other lawful private-property use. Plate visibility laws vary by location and road use.
License plate cover questions
What plate size does it fit?
The standard 12×6 inch North American plate format.
Does it require wiring?
Yes, 12V wiring is required. Consider a professional installation if you're uncomfortable with automotive electrical work.
Can I use it to cover a plate on public roads?
These products are intended for lawful off-road, show, track, photo or private-property use. Laws vary, and obscuring a plate on public roads may be prohibited.